7RQT8858Important notes for recording≥It is not possible to record to both DVD and VHS drive simultaneously.Selecting Audiofor RecordingBroadcast in multi-channel sound (Digital broadcastonly):You can select the audio language when receiving audio inmulti channel broadcast [“Multi Audio” appears at thebottom of digital channel information display (➡ 21)].However, audio cannot be switched after recording.Bilingual broadcasts (Analogue broadcast only):[RAM] [VHS]Both main and secondary audio can be recorded.You can change the audio during playback.(➡ 34, Changing audio during play)However in the following cases, select whether to recordthe main or secondary audio:–Recording sound in LPCM (➡ 64, Audio Mode for XPRecording)If you record from externalequipment–Select both “M 1” and “M 2” on theexternal equipment.[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]Select the main or secondary audio before recording(➡ 64, Bilingual Audio Selection)If you record from external equipment–Select “M 1” or “M 2” on the external equipment.About the aspectwhen recording aprogramme[RAM] [-R] [-R]DL] [-RW‹V›]≥If “Aspect for Recording” in the Setup menu is set to“Automatic” (The default setting is “Automatic” ➡ 63), theprogramme will be recorded in the original aspect usedwhen recording started (including when recording startedat a commercial, etc.). If recorded with a different aspect,select the correct aspect (“16:9” or “4:3”).However, in the following case, programme will berecorded in 4:3.[-R] [-R]DL] [-RW‹V›]Programme recorded using “EP” or “FR (recordings 5 hoursor longer)” recording modes will be recorded in 4:3 aspect.[VHS]The original aspect used for the source programme willalso be used with the recording.[+R] [+R]DL] [+RW]When recordingthe “One time onlyrecording”broadcastsIt is not possible to record the broadcasts that allow “One time only recording” onto DVD-R, DVD-R DL, DVD-RW, +R,+R DL, +RW or 8 cm DVD-RAM discs. Use the CPRM (➡ 80) compatible DVD-RAM.≥Even when copying to videotape the title may not be copied correctly because of the copy guard.Playing the discon other DVDplayers[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]The disc must be finalised after recording or copying (➡ 59).It is necessary to finalise DVD-R, etc. on this unit after recording or copying titles to them. You can then play them as acommercially sold DVD-Video. However, the discs become play-only and you can no longer record or copy.§§You can record and copy again if you format DVD-RW.Recording to DVD-R DL and +R DLDVD-R DL and +R DL discs have two layers of recording surface on one side.≥It is not possible to record continuously from the first layer to the second layer. Recording stops when spaceon the first layer becomes full. You must close the first layer to start recording on the second layer (➡ 60).Closing makes the first layer unavailable for recording (editing is still available). You cannot cancel closing. Makecertain before proceeding.HelloSelect the audio that youwant to record in “DVBMulti Audio” in the on-screen menu (➡ 43).Hola HalloM 1 M 2HalloHelloM 1HelloThe selectedaudio only isrecorded.Recorded in 4:3 aspect`[RAM] CPRM compatible discs only. [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW](≤: Can do, –: Cannot do)CHGSEARCHENTEROFFMENURETURNTOP MENU DISPLAYVOLONA.SURROUNDMONITOR MODEPICTURE MODEREPEATOPENDC IN 9VÍ /I Í CD SEQUENTIAL DISCDOUBLE RE-MASTER ;∫ 1 :/6 5/9 DISC EXCHANGE DISC SKIP <OPEN/CLOSE1 2 3 4 5Play on other DVD equipmentRecord to DVD-R, etc.FinaliseIt is not possible torecord continuouslyfrom the first layer tothe second layer.(Disc innerside)(Disc outerside)The availablespaceTitle 1 Title 2Recording/Playback directionThe second layerThe first layerDVD-R DL+R DLDisc information/Important notes for recording