Panasonic DMR-EZ47V Operating Instructions Manual

Also see for Diga DMR-EZ47V: Operating instructions

Contents

8RQT8858Disc handling∫ How to hold a discDo not touch the recorded surface.∫ Concerning non-cartridge discsBe careful about scratches and dirt.∫ If there is dirt or condensation on the discWipe with a damp cloth and then wipe dry.∫ Handling precautions≥Do not attach labels or stickers to discs. (This may cause discwarping and un-balanced rotation, rendering it unusable.)≥Write on the label side of the disc only with a soft, oil-based feltpen. Do not use ballpoint pens or other hard writing implements.≥Do not use record cleaning sprays, benzine, thinner, staticelectricity prevention liquids or any other solvent.≥Do not use scratch-proof protectors or covers.≥Do not drop stack, or impact discs. Do not place objects on them.≥Do not use the following discs:–Discs with exposed adhesive from removed stickers or labels(rental discs, etc.).–Discs that are badly warped or cracked.–Irregularly shaped discs, such as heartshapes.≥Do not place in the following areas:–In direct sunlight.–In very dusty or humid areas.–Near a heater.–Locations susceptible to significant difference in temperature(condensation can occur).–Where static electricity or electromagnetic waves occur.≥To protect discs from scratches and dirt, return them to their casesor cartridges when you are not using them.The precision parts in this unit are readily affected by theenvironment, especially temperature, humidity, and dust.Cigarette smoke also can cause malfunction or breakdown.To clean this unit, wipe with a soft, dry cloth.≥Never use alcohol, paint thinner or benzine to clean this unit.≥Before using chemically treated cloth, carefully read theinstructions that came with the cloth.Observe the following points to ensure continued listening andviewing pleasure.Cleaning the DVD lensDust and dirt may adhere to the unit’s lens over time, making itimpossible to record or play discs.Use the DVD lens cleaner about once every year, depending onfrequency of use and the operating environment. Carefully read thelens cleaner’s instructions before use.Cleaning the video headsDirt on the video heads can cause poor recording and play.≥If the picture does not improve, use a head-cleaning cassette. If theproblem persists seek advice from a qualified service personnel.Cautions about condensationCondensation can cause unreliable playback of VHS recordings.Condensation may form in the following cases,≥The unit is brought from cold surroundings into a well-heated room.≥The unit is suddenly brought from cool surroundings, such as anairconditioned room or car, to a place which is hot and humid.≥During rainy seasons.In any of the above-mentioned conditions, do not operate the unit forat least 2 hours. The unit is not equipped with a moisture sensor.DO DO NOTDO DO NOT DO NOTThe manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problemwith the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused bysuch loss.Examples of causes of such losses are≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.≥A disc used as described above and then played again in this unit.≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.Unit careDVD lens cleaner: RP-CL720E≥This lens cleaner may not be for sale depending on theregion.≥Do not place the unit onamplifiers or equipment thatmay become hot.The heat can damage the unit.≥The unit should not be installedor operated near large magnetsor electromagnetic devices.Such devices can damage pre-recorded VHS recordings.≥Do not place any heavy objects on top of the unit.≥The unit should not be mounted in a vertical position. It’sdesigned to operate in the horizontal position.Select a position with good ventilation when installing the unit. Donot block the cooling fan on the rear of the unitBefore moving the unit, ensure the disc tray andcassette compartment are empty.Failure to do so will risk severely damaging the discand the unit.DO NOT