Panasonic DMR-EZ47V Operating Instructions Manual

Also see for Diga DMR-EZ47V: Operating instructions

Contents

31RQT8858≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Press [PROG/CHECK].∫ To change a programmePress [3, 4] to select the programme and press [OK]. (➡ 29,step 3)∫ To delete a programmePress [3, 4] to select the programme and press [DELETE ¢].You can also delete a programme with the following steps1 Press [3, 4] to select the programme and press [OPTION].2 Press [3, 4] to select “Delete” and press [OK].∫ To exit the timer recording listPress [PROG/CHECK].Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.Check, change or delete a programmeTimerRecording Remain12:56:00 15. 7. TUERETURNOKPress OK to store new programme.ModeStopStartNo. Date DriveName DrivespaceNew Timer Programme1:58 SPDVD--:----VHSIconsF Timer recording standby is activated.[ This programme is currently recording.W The times overlap those in another programme.Recording of the programme with the later start timestarts when the earlier programme finishes recording.You stopped a weekly or daily timer recording. Theicon disappears the next time the timer programmestarts recording.F The disc was full so the programme failed to record.The programme was copy-protected so it was notrecorded. [DVD]X The programme did not complete recording becausethe disc or video cassette is dirty or some otherreason.Drive: Recording drive is set to DVD or VHS.lMessage displayed in the “Drive space” lineOK: Displayed if the recording can fit in the remainingspace. [DVD]> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made (upto a maximum of one month from the presenttime) based on the time remaining on the disc.! : It may not be possible to record because:≥The disc is write-protected. [DVD]≥There is no more space left. [DVD]≥The number of possible titles has reached itsmaximum. [DVD]≥The new timer recording will completely orpartially record over this timer recording.The timer recording was not performed orcompleted for the following reasons:≥A disc or a video cassette was not inserted.≥A protected disc or a video cassette without asecure accidental erasure prevention tab wasinserted.≥The remaining recording time on the videocassette was insufficient. [VHS]– – : All other recordable cases. [VHS]Timer recording