Panasonic DP-8032 Service Manual

Also see for DP-8025: Operating instructions Operating instructions

Contents

205DP-8032/80252008Ver. 1.2068 NYSE FaxForward(USA andCanada Only)1 = Off2 = OnSelects whether the machine will forward theincoming and outgoing faxes to a specified station.Note:Once this parameter is activated, FaxForwarding via Fax Parameter 054 isautomatically disabled, an Access Code of"0000" is automatically assigned and FaxParameter 038 has a new setting added called"NYSE".069 NYSE LocalPrint(USA andCanada Only)1 = Inc2 = On (Always)Selects the printing condition for the incoming faxesafter FAX Forwarding.INC. : Prints only if FAX Forwarding fails.ON : Always prints.070 Line Error 1 = 128 lines2 = 256 lines3 = 512 lines4 = 1024 lines5 = 2048 lines6 = Off(will not disconnect line)1. Selects the line disconnect condition duringreception. If the number of line errors exceed thissetting, the unit will disconnect the line.2. Selects the transmit condition of RTP/PIP orRTN/PIN.(Available if No.73 Error Detect is set to "LINES")(See Note 1)071 Total Error 1 = 5%2 = 10%3 = 15%4 = 20%Selects the transmit condition of RTP/PIP or RTN/PIN.(Available if No.73 Error Detect is set to "RATE".)(See Note 2)072 ContinuousError1 = Off (unlimited)2 = 3 lines/STD3 = 6 lines/STD4 = 12 lines/STDSelects the continuous total error criteria of Off/3/6or 12 lines in Standard mode. If continuous totalerror exceeds this setting, the unit will transmit RTN/PIN.(Available if No.73 Error Detect is set to "RATE".)073 Error Detect 1 = Lines2 = RateSelects the error detect condition Lines/Rate.074 RTN Receive 1 = Disconnect2 = ContinueSelects whether to disconnect the phone line orcontinue when "RTN" is received.075 Coding 1 = MH (MH only)2 = MR (MH or MR)3 = MMR(MH, MR or MMR)4 = JBIGSelects the coding scheme.076 Batch TX(USA andCanada Only)1 = Off2 = OnSelects whether the batch transmission is available.077 RX JAM Length 1 = Off (unlimited)2 = 2 mSelects the maximum length of a receiveddocument that can be printed.078~079Not Used080 Original LeadEdge ADF-99~+99Adjusts the distance between the scanning sensorON position and the scanning start position.081 Original TailEdge ADF-127~+127Adjusts the distance between the scanning sensorOFF position and the scanning end position.Function Parameter TableNo. Parameter Selections Function