Panasonic DVCPRO50 AJ-D960EG Operating Instructions Manual

Contents

ENGLISH75 (E)Setup menusUSER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display500 VITC 0000 BLANKBLANK 0001 THRU501 VITC 625 modePOS-1 0000 7L. .. .. .0004 11L. .. .. .0015 22L525 mode0000 10L. .. .. .0006 16L. .. .. .0010 20L502 VITC 625 modePOS-2 0000 7L. .. .. .0006 13L. .. .. .0015 22L525 mode0000 10L. .. .. .0008 18L. .. .. .0010 20L503 TCG 0000 TC&UBREGEN 0001 TC0002 UB504 REGEN 0000 AS&INMODE 0001 ASSEM0002 INSRT0003 SW505 EXT TC 0000 LTCSEL 0001 VITC506 BINARY 0000 000GP 0001 0010002 0100003 0110004 1000005 1010006 1100007 111The underline on the setting item denotes the initial setting.For selecting whether to output the VITC signal at the posi-tions selected by setup menu items No. 501 (VITC POS-1)and No. 502 (VITC POS-2).0: VITC signals are not output.1: VITC signals are output.This sets the position where the VITC signal is to be inserted.The same line as the one used for the setup menu itemNo. 502 (VITC POS-2) setting cannot be set.This sets the position where the VITC signal is to be inserted.The same line as the one used for the setup menu itemNo. 501 (VITC POS-1) setting cannot be set.This selects the signal to be regenerated when the time codegenerator (TCG) in the REGEN mode.0: Both the time code and user bit are regenerated.1: Only the time code is regenerated.2: Only the user bit is regenerated.This selects whether the time code is to be regenerated duringautomatic editing using the unit’s control panel.0: Time code is regenerated with assemble or insert editing.1: Time code is regenerated with assemble editing.2: Time code is regenerated with insert editing.3: Setting complies with REGEN/PRESET switch setting.This selects the time code to be used when an external timecode is to be used.0: The LTC of the TIME CODE IN connector is used.1: The video signal VITC is used.This sets the usage status of the user bit of the time codegenerated by the TCG.0: NOT SPECIFIED (character set not specified)1: ISO CHARACTER (8 bits character set based on ISO646,ISO2022)2: UNASSIGNED 1 (undefined)3: UNASSIGNED 2 (undefined)4: UNASSIGNED 3 (undefined)5: PAGE/LINE6: UNASSIGNED 4 (undefined)7: UNASSIGNED 5 (undefined)