Panasonic Diga DMR-EH59 Operating Instructions Manual

Contents

29RQT9385Advancedoperations1 While the unit is onPress [∫].2 Press [2, 1] to select “StopRecording” and press [OK].If you stop a timer recording, it will be cancelled. However, ifyou have set a weekly or daily timer recording, the recordingwill start from the next time the timer recording is set.Even when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press the “Red” button.≥The timer icon “F” (@ right) disappears from the timerrecording list.≥You cannot cancel timer recording standby mode as long aseven one timer icon “F” (@ right) remains in the timerrecording list.≥Press the “Red” button again to activate timer recordingstandby.≥During timer recording standby, this unit cannot play discs or titlesrecorded on HDD that do not match the “TV System” setting. It isrecommended “TV System” be set to match the discs or title beforeplaying them. But to prevent the failure of the timer recording,change back the settings before the recording starts. (> 66)≥Timer recordings are activated regardless of whether the unit isturned on/off.≥Timer recordings begin when the set time is reached even whenplaying.≥Timer recordings do not begin while editing or copying in normalspeed mode (> 49).≥If the unit is turned on when timer recording begins, it remainsturned on after recording finishes. It does not turn off automatically.You can turn the unit off during timer recording.≥When you programme successive timer recordings to startimmediately one after the other, the unit cannot record the part atthe beginning of the later programmes.≥(If the GUIDE Plus+ system is set)The GUIDE Plus+ data is downloaded at 2:50 AM every day. Ittakes approximately 2 hours to complete data download. If youwant to make timer recordings during this time, set “NightDownload” in the GUIDE Plus+ system setup menu to “Off” (> 13).≥If the actual broadcasting times of timer recordings overlap[regardless of whether they are VPS/PDC (> 30) controlled], therecording that starts first always has priority, and the recording ofthe later programme will start only after the first timer recording hasfinished.≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Press [PROG/CHECK].∫ To change a programmePress [3, 4] to select the programme and press [OK]. (> 28,right column, step 3)∫ To delete a programmePress [3, 4] to select the programme and press [DELETE ¢].You can also delete a programme with the following steps1 Press [3, 4] to select the programme and press [OPTION].2 Press [3, 4] to select “Delete” and press [OK].∫ To exit the timer recording listPress [PROG/CHECK].Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.To cancel recording when recordinghas already begunTo release the unit from recordingstandbyNotes on timer recordingStop RecordingStop Recording CancelTimer recording in progress.Stop this timer recording?It will be cancelled if you stop.OK RETURNSELECTProgramme ProgrammeRecorded RecordedNot recordedCheck, change or delete a programmeTimerRecording 1:58 SPDVD30:24 SPHDDRemainTUE 18.08.09. 12:53:00RETURNOKPress OK to store new programme.ModeStopStartNo. Date VPSPDCHDDDVDChannel DrivespaceNew Timer ProgrammeIconsF Timer recording standby is activated.[ This programme is currently recording.The times overlap those in another programme.Recording of the programme with the later start timestarts when the earlier programme finishes recording.You stopped a weekly or daily timer recording. The icondisappears the next time the timer programme startsrecording.The disc was full so the programme failed to record.The programme was copy-protected so it was notrecorded.X The programme did not complete recording becausethe disc is dirty or some other reason.Timer programmes set to Auto Renewal Recording(> 30).Titles that have been rerouted to the HDD(Displayed while recording.)HDD Recording drive is set to HDDDVD Recording drive is set to DVDMessage displayed in the “Drive space” lineOK: Displayed if the recording can fit in theremaining space.> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made(up to a maximum of one month from thepresent time) based on the time remaining onthe disc.! : It may not be possible to record because:≥there is not enough space left≥the number of possible titles has reached itsmaximum.≥The timer programme is deactivated.Relief: Timer programmes that will be relief recorded tothe HDD.