Panasonic Diga DMR-EH59 Operating Instructions Manual

Contents

53RQT9385CopyingTo return to the previous screenPress [RETURN ].To stop copyingPress [∫].You can also press and hold [RETURN ] for 3 seconds to stopcopying.≥If stopped partway, copying will be up to that point.≥The screen on the right is recorded at thebeginning.≥The content is recorded as 1 title from the start ofcopy to the end.≥If play does not begin automatically or if the topmenu does not display automatically, press [1] (PLAY) to start.≥Even if you copy a high quality video/audio DVD, the originalpicture and audio quality cannot be exactly replicated.≥If you want to copy a title from a finalised DVD-RW (DVD VideoRecording format), create a copy list and then copy (> 51,Copying using the copying list–Advanced Copy).Motion pictures encoded in the MPEG2 format, which have beentaken by a Panasonic SD Video Camera, digital video camera etc,can be stored on HDD or DVD-RAM.(All the recordings on the same date become a title.)≥You cannot playback SD Video on an SD card with this unit.You must copy the files to the HDD or a DVD-RAM.≥You cannot playback or record while copying SD Video.≥This unit cannot copy AVCHD format motion pictures from an SDcard.Motion pictures encoded in the MPEG2 format, which have beentaken by a Panasonic digital video camera with HDD etc, can becopied from the camera’s HDD to this unit’s HDD or DVD-RAM.(All the recordings on the same date become a title.)≥You cannot playback SD Video in the camera’s HDD with this unit.You must copy the files to the HDD or a DVD-RAM.≥You cannot playback or record while copying SD Video.Copying Video (MPEG2) from an SDcard [EH69]The display below automatically appears when you insert a cardinto the SD card slot while stopped.Press [3, 4] to select “Copy Video ( MPEG2 )” and press [OK].Then go to step 7 on page 51.≥SD Video on an SD card are automatically registered on thecopy list.≥If there are no SD Video on an SD card, “Copy Video( MPEG2 )” is not displayed.NoteHDDDVD-RAMVIDEO§§DVD Video Recording formatVideo (MPEG2)SD CardCopy New Pictures ( JPEG )Play Pictures ( JPEG )Copy Video ( MPEG2 )OK RETURNSELECTCopying Video (MPEG2) from a videoequipment [EH69] [EH59]Preparation1 Turn on both this unit and the camera.2 Connect the camera to this unit with USB cable.3 Select the appropriate mode that makes the camera ready fordata transfer (such as “PC CONNECT”) on the camera.≥Refer to the camera’s operating instructions for detail.The display below automatically appears when you connect thecamera to this unit.Press [3, 4] to select “Copy Video ( MPEG2 )” and press [OK].Then go to step 7 on page 51.≥SD Video on the camera are automatically registered on the copylist.≥If there are no SD Video on the camera, “Copy Video ( MPEG2 )”is not displayed.HDDDVD-RAMVIDEO§§DVD Video Recording formatVideo (MPEG2)USB cableUSB deviceOK RETURNSELECTPlay Video ( DivX )Copy Video ( MPEG2 )Play Pictures ( JPEG )Copy Pictures ( JPEG )Play Music ( MP3&WMA )Copy Music ( MP3&WMA )Update CD database on HDDCopy All Pictures ( JPEG )