Panasonic Diga DMR-EH59 Operating Instructions Manual

Contents

67RQT9385Setting menus(All factory default settings are indicated with underlined text.)§1 The timer recording programmes are also cancelled.§2 Recordings on the HDD will not be deleted.AV2 SettingsSet to match the connected equipment.≥Press [OK] to show the following settings.AV2 InputSet to “RGB / Video” or “RGB” when receiving or recording RGBoutput from external equipment.[RGB / Video] [RGB] [Video] [S Video]AV2 ConnectionThis setting is fixed with “Ext” if you set “TV System” to “NTSC”.[Decoder] When a decoder is connected to descramble thescrambled signals (e.g., C+decoder).[Ext] When the VCR or a digital/satellite receiver isconnected.Ext LinkThis setting cannot be made when the “TV System” is set to“NTSC”.[Ext Link 1] When a digital/satellite receiver which transmitsa special control signal recordings via the 21-pinScart cable is connected.Start and stop timings of recording are controlledby the control signal.[Ext Link 2] When external equipment with a timer function isconnected.When it turns on, recording starts.When it turns off, recording stops.OthersRemote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonicproducts close together.[DVD 1] [DVD 2] [DVD 3]Use “DVD 1”, the factory set code, under normal circumstances.1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or“DVD 3”) and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].∫ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remote control to match the main unit’s(@ step 2).Executing “Shipping Condition” in the Setup menu returns themain unit code to “DVD 1”. Change the remote control code to 1(@ step 2).SetupTuningRemote ControlPress “” and “OK” togetherfor more than 5 seconds on the remotecontrol.DiscPictureNoteClockUsually, the unit’s setup function (> 10) automatically adjusts theclock to correct time. Under some reception conditions, however,the unit cannot set the clock automatically.In this case, follow the operation steps below to manually set the clock.1 Press [3, 4] to select “Off” of “Automatic” and press[OK].2 Press [2, 1] to select the item you want to change.The items change as follows:Hour!#Minute!#Second!#Day!#Month!#Year^-----------------------------------------------------------------------------------------J3 Press [3, 4] to change the setting.You can also use the numbered buttons for setting.4 Press [OK] when you have finished the settings.The clock starts.If a TV station transmits a time setting signal, and when“Automatic” in the Clock setting menu is set to “On”, the automatictime correction function checks the time and if necessary it isadjusted several times every day.Setting for Standby≥Press [OK] to show the following settings.Power Save[On] Power consumption is minimized when the unit is turnedto standby (> 83).[Off] This sets to Quick Start Mode.≥Refer to the chart for the Power Save function features (> 10)when the unit is turned off.Auto StandbySet the time to automatically turn the unit off.After the unit has finished operating, the unit will be turned offonce the set time has passed.[2 hours] [4 hours] [6 hours][Off] The unit will not automatically turn off.DivX RegistrationYou need this registration code to purchase and play DivX Video-on-Demand (VOD) content (> 35).Initialize≥Press [OK] to show the following settings.Shipping Condition§1§2All the settings except for the ratings level, ratings password andclock settings return to the factory preset.[Yes] [No]Default Settings§1§2All the settings other than the tuning settings, clock settings,country settings, language settings, disc language settings,ratings level, ratings password, remote control code, return tothe factory presets.[Yes] [No]ClockAutomatic OffTime Date15 : 45 : 39 1 . 8 . 2009Please set clock manually.OK: store RETURN: leave0 9NumberOK RETURNSELECTCHANGENote