Panasonic Diga DMR-EX77 Operating Instructions Manual

Also see for Diga DMR-EX77: Operating instructions

Contents

32RQT8860Timer recordingRefer to the control reference on page 28.Even when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].Press [PROG/CHECK].∫ To change a programmePress [3, 4] to select the programme and press [OK]. (➡ 30,right column, step 3)∫ To delete a programmePress [3, 4] to select the programme and press [DELETE ¢].You can also delete a programme with the following steps1 Press [3, 4] to select the programme and press [OPTION].2 Press [3, 4] to select “Delete” and press [OK].∫ To exit the timer recording listPress [PROG/CHECK].Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.When the recording drive is “DVD” and there is not enoughremaining space, recording automatically switches to the “HDD”. Ifthere is no disc in the tray or the disc cannot be recorded on or whentimer recording starts while copying, the recording drive will bealtered to the HDD.≥The Direct Navigator shows which programmes were relief-recorded (“ ” is displayed.) (➡ 34).≥If the time remaining on the HDD is insufficient, as much of theprogramme as possible will be recorded onto the HDD.[HDD]If you record a programme onto HDD repeatedly everyday or everyweek using timer recording, the unit will record the new programmeover the old one.This function can be used only when weekly recording or dailyrecording is selected.1 Press [PROG/CHECK].2 Press [3, 4] to select the programmeand press [OK].3 Press [2, 1] to select “RENEW”column.4 Press [3, 4] to select “ON” and press[OK].[Note]≥If a programme set for Auto Renewal Recording is protected orwhile play back is taking place from the HDD, or while copying, theprogramme will not be overwritten. Instead the programme set forrecording will be saved as a separate programme, and thisprogramme will be the one to be overwritten when the next AutoRenewal Recording takes place.≥Playlists made from programmes that were set for Auto RenewalRecording are deleted along with auto renewal.≥When there is not enough space on the HDD, the programme maynot be recorded completely.Check, change or delete a programmeTimerRecording 1:58 SPDVD30:24 SPHDDRemain12:56:00 15. 7. TUERETURNOKPress OK to store new programme.ModeStopStartNo. Date HDDDVDName DrivespaceNew Timer ProgrammeIconsF Timer recording standby is activated.[ This programme is currently recording.W The times overlap those in another programme.Recording of the programme with the later start timestarts when the earlier programme finishes recording.You stopped a weekly or daily timer recording. The icondisappears the next time the timer programme startsrecording.F The disc was full so the programme failed to record.The programme was copy-protected so it was notrecorded.X The programme did not complete recording becausethe disc is dirty or some other reason.Timer programmes set to Auto Renewal Recording(➡ right).Titles that have been rerouted to the HDD(Displayed while recording.)HDD Recording drive is set to HDDDVD Recording drive is set to DVDlMessage displayed in the “Drive space” lineOK: Displayed if the recording can fit in theremaining space.> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made (upto a maximum of one month from the presenttime) based on the time remaining on the disc.! : It may not be possible to record because:≥there is not enough space left≥the number of possible titles has reached itsmaximum.Relief: Timer programmes that will be relief recorded tothe HDD.Relief RecordingAuto Renewal RecordingTimerRecording 1:58 SPDVD30:24 SPHDDRemain12:54:00 15. 7. TUEModeStopStartName Date HDDDVD22:3022:00SUN HDD1 ARDProgramme NameSPRENEWONAll Services : ARD