Panasonic Diga DMR-EX77 Operating Instructions Manual

Also see for Diga DMR-EX77: Operating instructions

Contents

72RQT8860Changing the unit’s settingsRefer to the control reference on page 64.You can restart auto channel setting for terrestrial digital andanalogue channels if set up (➡ 20) fails for some reason.After performing steps 1–4 (➡ 69)5 Press [3, 4] to select “Auto-SetupRestart” and press [OK].The confirmation screen appears.6 Press [2, 1] to select “Yes” andpress [OK].You can also use the following method to restart Auto-Setup.When the unit is on and stoppedPress and hold [X CH] and [CH W] on the main unit until theAuto-Setup screen appears.All the settings except for the ratings level, ratings password andtime settings return to the factory preset. The timer recordingprogrammes are also cancelled.To return to the previous screenPress [RETURN].To exit the screenPress [EXIT].List of TV Reception ChannelsChange the setting to match the equipment you are connecting with,or to match the title when there are both PAL and NTSC titles on theHDD.1 Press [FUNCTION MENU].2 Press [3, 4] to select “To Others”and press [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select “Connection”and press [1].5 Press [3, 4] to select “TV System”and press [OK].6 Press [3, 4] to select the TV systemand press [OK].≥PAL (factory preset)–Select when connecting to a PAL or Multi-systemtelevision. Titles recorded using NTSC are played as PAL60.–Select to record television programmes and PAL input fromother equipment.–[HDD] Select when playing a PAL input title recorded on theHDD.≥NTSC–Select when connecting to a NTSC television. Televisionprogrammes cannot be recorded properly.–Select to record NTSC input from other equipment.–[HDD] Select when playing a NTSC input title recorded onthe HDD.7 Press [2, 1] to select “Yes” andpress [OK].To return to the previous screenPress [RETURN].To exit the screenPress [EXIT].∫ To change the setting all at once (PAL!#NTSC)While stopped, keep pressing [∫] and [< OPEN/CLOSE] on themain unit simultaneously for 5 or more seconds.[Note]≥This unit cannot record NTSC signals to discs that already havePAL signal recordings. (However, both types of programmes canbe recorded onto the HDD.)≥If “NTSC” has been selected, the TV Guide system cannot beused.Auto-Setup RestartTunerSystemChannelCoverage VHF UHF CATVPAL-BGHSECAM-BG CCIRE2 – E12A – H2(Italy)21 – 69S01 – S05(S1 – S3)S1 – S20(M1 – U10)S21 – S41SECAM-LL’ France 2 – 10 21 – 69B – Q(100.5 – 299.5MHz)S21 – S41(299.25 –467.25 MHz)DVB-TGermanyFranceItalySpain5 – 125 – 10D – H25 – 1221 – 6921 – 6921 – 6921 – 69–TV SystemSetup TV SystemPALNTSCDiscPictureSoundDisplayTuningConnectionOthers OK RETURNSELECT