Panasonic Diga DMR-EX77 Operating Instructions Manual

Also see for Diga DMR-EX77: Operating instructions

Contents

69RQT88601 Press [FUNCTION MENU].2 Press [3, 4] to select “To Others”and press [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select “Tuning” andpress [1].You can create four profiles of channels for making viewing andrecording easier. Editing these profiles does not affect the channelsetting itself.≥Timer recording may not work correctly if you edit the profilesduring timer recording standby.After performing steps 1–45 Press [3, 4] to select “Edit Profiles”and press [OK].6 Press the “Green” button to select theprofile.∫ To add channels to a profileAfter performing steps 1–61 Press [3, 4] to select the channel in the “AllServices” column and press the “Yellow”button.≥Repeat this step to add other channels.≥Press the “Blue” button to add all the available channels to theprofile. (Only when no channels have been added to theprofile.)2 Press [OK] to save the profile.∫ To change the order of channels of a profileAfter performing steps 1–61 Press [1]§ .2 Press [3, 4] to select the channel in the“Profile” column to move and press the “Green”button.3 Press [3, 4] to select the new position of thechannel and press the “Green” button.≥Repeat the steps 2 – 3 to move other channels.4 Press [OK] to save the profile.∫ To delete channels on a profileAfter performing steps 1–61 Press [1]§ .2 Press [3, 4] to select the channel in the“Profile” column and press the “Yellow” button.≥Repeat this step to delete other channels.≥Press the “Blue” button to delete all the channels from theprofile.3 Press [OK] to save the profile.Deleting a channel from a profile does not affect the channelitself. You can still select the channel from the “All Services”profile.∫ To change the name of a profile in the “Profile”columnAfter performing steps 1–61 Press [1]§ .2 Press the “Red” button.(➡ 59, Entering text)§ When the station name of the “All Services” column is highlightedTo browse through the listPress [W X CH].To exit the screenPress [EXIT].You can search for newly added terrestrial digital channels toreceive.After performing steps 1–45 Press [3, 4] to select “Settings forDigital Services ” and press [OK].6 Press [3, 4] to select “Add New DVBServices” and press [OK].The unit starts searching for newly available terrestrial digitalchannels. This takes about 5 minutes.A message is displayed when the search is finished.“No new services found.” is displayed when no new servicescan be found.7 Press [OK] to save the newly foundchannels.To stop partwayPress [RETURN].The channels found before stopping are not saved.To exit the screenPress [EXIT].TuningEdit ProfilesSetupDiscPictureSoundDisplayConnectionTuningEdit ProfilesAuto-Setup RestartSettings for Digital ServicesOthers OK RETURNTABSELECTSettings for Analogue ServicesEdit PlofilesRETURNSELECTProfile Select Add AllAddAll Services2 ABC20 ABC HDTVProfile 1Page -Page +Add New DVB ServicesAdd New DVB ServicesPlease wait! Ch 5 69Prog. QualityChannel Service Name Net ID TS IDRETURNRETURN: to cancelChanging the unit’s settings