Recording Television ProgramsRefer to "Important Notes for Recording" (-+ 20) and "Advanced Recording" (-+ 21 to 23) for detailed information onrecording.lim! iii ED OM1m IDm Im'l'JPreparation:• Turn on the television and select the appropriate video input to suit theconnections to this unit (Example: AV input).• lim! If the disc is protected, release protection (-+ 44).DVDPOWERo~ to turn the unit on.- "HELLO" appears on the unit's display.ft I~OPEWCLOSE~V to open the tray (Sutton located on the upper front of the unit).- Insert a disc with enough remaining blank space and press[~ OPEN/CLOSE] again to close the tray.e I~ ~ to select desired channel.Antenna Mode: Cable TV Mode:e.g. channel 4-2 e.g. channel 102-45n-l------~ [ ~ I'-u u ]LIt t. L 0 ,- 11l111'-L t LlC. -,.] 0- To select with the numbered buttons (-+ 15).- When no channel setting is performed on the unit and broadcast isrecorded directly from the cable box or satellite receiver, select achannel on the connected equipment and press [INPUT SELECT]to select "IN1" or "IN2".RECMOOEo~ to select the recording mode.- Recording mode should be determined by program length andavailable time on the disc (-+ 21).II Il /·IlllII ,-- I·LI LI 0- -Recording modeRECo ~to start recording.Remaining time[J TipsIcons such as "1:& " indicate usablediscs. Refer to pages 62 and 63.REC 1l.1l1l1l ILI·LI Ll.LI t 0Pausing RecordingPress [II PAUSE].- Press again to restart recording.Stopping RecordingPress [. STOP].@ Notes• !iJ mll!m'll'1I 1m mEl mIt takes about 30 seconds for the unitto complete recording managementinformation after recording finishes.• You cannot change the channel orrecording mode during recording.RQT9046