Panasonic Diga DMR-EZ28 Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

Linked Operations with the TV (VIERA Link™ "HDAVI ControI™'')You can enjoy linked operations with the TV and receiver by using "HDAVI Control",What is VIERA Unk "HDAyt ContrOl"? :.,VIERA Link™ is a new name for EZ Sync™.VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a PanasonicTV (VIERA) or receiver under "HDAVI Control". You can use this function by connecting the equipment with theHDMI cable. See the operating instructions for connected equipment for operational details.• VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standardknown as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed andadded. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot beguaranteed.• This unit supports "HDAVI Control 3" function."HDAVI Control 3" is the newest standard (current as of December, 2007) for Panasonic's HDAVI Controlcompatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipmentsupporting VIERA Link function.• Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function.Preparation1. Connect this unit to your TV or receiver with an HDMI cable (-+ 11, 61).2. Set "VIERA Link" to "On" (-+ 55). (The default setting is "On".)3. Set the "HDAVI Control" operations on the connected equipment (e.g., TV).• When using HDMI2 terminal of VIERA as "HDAVI Control" , set the input channel to HDMI2 on VIERA.4.Turn on all "HDAVI Control" compatible equipment and select this unit's input channel on the connected TV sothat the "HDAVI Control" function works properly.When the connection or settings are changed, repeat this procedure.When the TV is on and the following operations are performed, the TV's input willautomatically switch to HDMI input mode and the TV displays the correspondingaction.(Picture or sound may not be available for the first few seconds.)Press [FUNCTIONS]*l, ~ PLAy]*2, [DIRECT NAVIGATOR], [SCHEDULE] etc.When the TV is off and the following operations are performed, the TV willautomatically turn on and display the corresponding action.(Picture or sound may not be available for the first few seconds.)Press [~ PLAy]*2, [DIRECT NAVIGATOR], [SCHEDULE] etc .• ~*3etc.The TV is automatically turned on when you insert the discs.When you turn the TV off, this unit is also automatically turned off. This unitautomatically turns off even if the FUNCTIONS screen, the status message or theon-screen menu is displayed, during playback.Even if the TV is turned off, this unit will not turn off at the same time under thefollowing conditions:-when you press [e REG] and this unit is recording,-when scheduled recording is proceeding-when copying still pictures-when finalizing, etc.• When this unit is connected to an "HDAVI Control" compatible Panasonic receiver with an HDMI cable,the receiver will also turn off.*' This button is available only when this unit is on.*2When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contentsfrom where playback started.In this case, press [~] or [~l to go back to where playback started.*3 Depending on discs, the TV may not automatically turn on.§ Notes• When this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 3 and initially set up, it automatically acquires the TVsetting information.f::':\. These functions may not work normally depending on the equipment condition.~. About "HDAVI Control" function, read the operating instructions of the connected equipment (e.g., TV) too.RQT9046