Panasonic Diga DMR-EZ28 Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

[Off] Audio is output from an amplifier when using theDIGITAL AUDIO OUT terminal (-+ 60).{).A, T to select "Full" or "Normal",then~o .A, T to select "On" or "Off", then~)o .A, T to select "Standard" or"Enhanced", then ~[Full] Video output is enlarged to match the screensize.[Normal] Video is output as 4:3 aspect. Side panels(black bars on the left and right) will appearon the screen.Effective when connected to a device that onlysupports RGB output.After selecting "Functions of HOMI" (-+ 54, step 3)o .A, T to select "HDMI RGB OutputRange", then ~( HDMI RGB Output Range*[Enhanced] When the black and white images are notdistinct.( HDMI Audio Output )--.'-----------After selecting "Functions of HOMI" (-+ 54, step 3)o .A, T to select "HDMI Audio Output",then~o .A, T to select "On" or "Off", then~( VIERA Link* )After selecting "Functions of HOMI" (-+ 54, step 3)O.A, T to select "VIERA Link", then~(24p Output for DVD-Video* )Can be set when you make the HOMI connection witha TV supporting 24pWhen this unit is connected to a TV supporting1080/24p output via an HOMI cable, this unit displayseach frame at 1/24 second intervals - the same intervaloriginally shot with the film camera.After selecting "Functions of HOMI" (-+ 54, step 3)o .A, T to select "24p Output for DVD-Video", then ~[480i][480p][720p][1080i][1080p] When setting video output to "1 080p", werecommend using a Panasonic HIGH SPEEDHOMI cable to prevent video distortion.o .A, T to select the item, then ~[Auto] Automatically selects the output resolutionbest suited to the connected television(1080p, 1080i, 720p or 480p).(HDMI Resolution* )You can only select items compatible with the connectedequipment. This setting normally does not need to bechanged. However if you are concerned about outputpicture quality, it may be improved by changing the setting.• To enjoy High Quality Video up-converted to 1080p, youneed to connect the unit directly to a 1080p-compatibleHOTV. If this unit is connected to an HOTV throughother equipment, it must also be 1080p compatible.After selecting "Functions of HOMI" (-+ 54, step 3)o .A, T to select "HDMI Resolution",then~(0 .... 'f' to select "On" or "Off", then ~[On] Set to "On" and then set "Progressive/24p"in the Video Menu in the On-Screen Menu(-+ 43) to "24p". When the video is beingoutput in 24 frames per second, no video isoutput from a video terminal other than theHOMI terminal.(HDMI Output Display Aspect* )Settings used when 4:3 aspect video is output on thetelevision as 16:9 aspect.After selecting "Functions of HOMI" (-+ 54, step 3)o .A, T to select "HDMI Output DisplayAspect", then ~[On] When "On" is selected, you can operate other"HOAVI Control" compatible devices using"HOAVI Control",@ NotesDepending on the equipment to connect, some items maybe shaded in gray on the display and cannot be selected, orchanging settings may be unavailable.*Above items can be set when you set "HDMI Priority" to "On". f::'\~RQT9046