Panasonic Diga DMR-EZ28 Operating Instructions Manual

Also see for Diga DMR-EZ28: Help guide Operating instructions Quick setup guide

Contents

(Input Level )Adjusts the black level of the input signal.After selecting "Black Level Control" (~ 50, step 3)0., • to select "Input Level", then~o ., •to select "Lighter" or "Darker",then~(Output Level (Composite/S Video) )Adjusts the black level of the output signal from theVIDEO OUT and S VIDEO OUT terminal.After selecting "Black Level Control" (~ 50, step 3)o ., •to select "Output Level(Composite/S Video)", then ~o ., •to select "Lighter" or"Darker", then OKDynamic Range CompressionI!I'1!I!J (Dolby Digital only)Change the dynamic range (~77) for easier listeningin low volume.Perform step 1 of "Accessing the Setup Menus" (~ 46).(e ., • to select "Audio", then ~ )e ., •to select "Dynamic RangeCompression", then ~o ., •to select "On" or "Off", then ~Multi-channel TV Sound (Analog)iiim!D EMM 1m ID]IIIm'JSelect whether to record the main or secondary audioprogram (SAP) when recording to these discs. (You cannotselect the audio type on the unit when recording audiofrom an external device. Select it on the external device.)Perform step 1 of "Accessing the Setup Menus" (~ 46).(e ., •to select "Audio", then ~ )e .. ,• to select "Multi-channel TVSound (Analog)", then ~o ., •to select "Main" or "SecondaryAudio Program (SAP)", then ~Multi-channel TV Sound (Digital)Select the preferred digital broadcast language.Perform step 1 of "Accessing the Setup Menus" (-+ 46).(e ., •to select "Audio", then ~ )e ., •to select "Multi-channel TVSound (Digital)", then ~0., • to select "English", "French" or"Spanish", then ~Digital Audio OutputChange the settings when you have connectedequipment through the unit's DIGITAL AUDIO OUTterminal (~ 60).Perform step 1 of "Accessing the Setup Menus" (-+ 46).(e ., •to select "Audio", then ~ )e ., •to select "Digital AudioOutput", then ~(PCM Down Conversion )Select how to output audio with a sampling frequencyof 96 kHz or 88.2 kHz. Signals are converted to 48 kHzor 44.1 kHz despite the settings if the signals have asampling frequency of over 96 kHz or 88.2 kHz, or thedisc has copy protection.After selecting "Digital Audio Output" (~ above, step 3)o ., •to select "PCM DownConversion", then ~o ., •to select "On" or "Off", then ~[On] Signals are converted to 48 kHz or 44.1 kHz.(Choose when the connected equipmentcannot process signals with samplingfrequency of 96 kHz or 88.2 kHz.)[Off] Signals are output as 96 kHz or 88.2 kHz.(Choose when the connected equipment canprocess signals with sampling frequency of 96kHz or 88.2 kHz.)RQT9046