Panasonic Digital Fiber Sensor FX-301 Specification Sheet

Contents

specifications

82FX-301FX-CT2FX-CT1FTP-500 (0.5 m 1.640 ft)FTP-1000 (1 m 3.281 ft)FTP-1500 (1.5 m 4.921 ft)FTP-N500 (0.5 m 1.640 ft)FTP-N1000 (1 m 3.281 ft)FTP-N1500 (1.5 m 4.921 ft )FDP-500 (0.5 m 1.640 ft)FDP-1000 (1 m 3.281 ft)FDP-1500 (1.5 m 4.921 ft)FDP-N500 (0.5 m 1.640 ft)FDP-N1000 (1 m 3.281 ft)FDP-N1500 (1.5 m 4.921 ft )FB-1MS-AJ1-FMS-AJ2-FFX-AT2FX-AT3FX-AT4FX-AT5FX-AT6FIBER OPTIONSDesignationProtective tubeFor thru-beamtype fiberProtective tubeFor reflectivetype fiberThis is the attachment for the "1.3 mm "0.051 in fiber (Accessory)This is the attachment for the "1 mm"0.039 in / "1.3 mm"0.051 in mixed fiber. (Accessory)This is the attachment for the "1 mm "0.039 in fiber(Accessory. Does not attach with the FD-N4.) (Note 4)This is the attachment for the "2.2 mm "0.087 in fiber.(Accessory. Does not attach with the FT-N8/NB8/P80 or the FD-N8/P80.)This is the attachment for the fixed length fiber. (Accessory )The free-cut type fiber can be easily cut.Accessory. Does not attach with the FT-N8/NB8 or theFD-N8/N4. (Note 3)The fiber bender bends the sleeve part of the fiber head at theproper radius. (Note 1)Mounting stand assembly for fiber(For M3, M4 or M6 threaded head fiber)Fiber cutterAttachment for fixed-length fiberAttachment for "2.2 mm"0.087 in fiberAttachment for "1 mm"0.039 in fiberAttachment for "1.3 mm"0.051 in fiberAttachment for "1 mm"0.039 in / "1.3 mm"0.051 in mixed fiberUniversal sensormounting stand(Note 2)Fiber benderForM4threadThe protectivetube, made ofnon-corrosivestainless steel,protects theinner fiber cablefrom anyexternal forces.FT-B8FT-NB8FT-FM2FT-FM2SFT-FM2S4FT-N8FT-P80FT-P60FT-H13-FM2FT-T80FT-NFM2FT-NFM2SFT-NFM2S4FT-P40FD-T40FD-P40FD-B8FD-FM2FD-FM2SFD-FM2S4FD-N8FD-P80FD-H13-FM2FD-T80FD-N4FD-NFM2FD-NFM2SFD-NFM2S4ForM3threadForM6threadForM4threadApplicable fibersModel No. DescriptionProtective tube• FTP-• FDP-Fiber bender• FB-1Universal sensor mounting stand• MS-AJ1-F• MS-AJ2-FUsing the arm which enables adjustmentin the horizontal direction, sensing canalso be done from above an assembly line.(( ))Notes: 1) Do not bend the sleeve part of any side-view type fiber or ultra-small diameter head type fiber.Notes: 2) Refer to p.332l for details of the universal sensor mounting stand.Notes: 3) A conventional FX-CT1 fiber cutter is attached with the FT-P80 and the FD-P80.Notes: 4) The conventional FX-AT10 fiber attachment is attached with the FD-N4.Fiber cutter• FX-CT2• FX-CT1Fiber attachmentIt’s possible to simultaneously cut two fibers to the same lengthEach fiber (with some exceptions) has a newly developed two-in-one fiber attachment (FX-AT3/AT4/AT5/AT6) which enables two fibers to be cut simultaneouslyto the same length with the new fiber cutter (FX-CT2). Also, since the fibers can be attached to the amplifier while being fixed in position in the two-in-one fiberattachment, sensitivity changes resulting from variation in the amount of fiber insertion do not occur.FX-AT2 FX-AT3 FX-AT4/AT5/AT6OthersHorizontal mounting typeVertical mounting typeNote: The above figure is MS-AJ1-F.The mounting base of MS-AJ2-Fhas a different shape.