Panasonic ES-LV9N Operating Instructions Manual

Also see for ES-LV9N: Operating instructions Operating instructions

Contents

12EnglishCharging without the self-cleaning recharger• Wipe off any water droplets on the appliance socket.1 Insert the appliance plug intothe shaver.2 Plug the adaptor into ahousehold outlet.3 Disconnect the adaptor aftercharging is completed. 12NoteYou cannot operate the shaver while charging.Preparing the cleaning liquidCleaning can start right after the usage by preparing in advance.(See page 15.)• Remove the AC adaptor from the self‑cleaning recharger.1 Press the cleaningliquid unit removalbutton (1) andremove the cleaningliquid unit (2) on ahard, flat surface.  • When the self‑cleaning recharger is lifted, or on the softsurface such as carpets, the lock release lever will not fit inthe recharger properly. In that case, the cleaning liquid unitcannot be removed.2 Pour tap water (1) anddetergent (2) into thecleaning liquid unit.• Be careful not to let thewater rise above themaximum water line (a).• Pour the entire packet ofdetergent. 3 Slowly insert thecleaning liquid unitinto the self-cleaningrecharger until it clicks.Notes• To replace the cleaning liquid, see page 18.• Only use self‑cleaning recharger detergent for Panasonic shavers.Not doing so may cause malfunction or failure.• Do not tilt the self‑cleaning recharger.Doing so may cause spill or the number of days that cleaningliquid can be used reduce.• You can use the cleaning liquid for approximately 30 days if usedonce per day.(This will differ depending on beard thickness and the ambienttemperature.)