Panasonic ES-LV9N Operating Instructions Manual

Also see for ES-LV9N: Operating instructions Operating instructions

Contents

18EnglishReplacing the cleaning liquidIf the STATUS lamp glows for 5 seconds when the SELECT buttonis pressed, the cleaning liquid needs to be replaced.• Even if the STATUS lamp does not light up, replace the cleaningliquid after 6 months have passed.1 Remove the AC adaptor andremove the cleaning liquid unit.(See page 12.)2 Wash away the old cleaningliquid.• It can be drained as sewage. 13 Rinse the cleaning liquid unit.• Pour water as illustrated while tilting thecleaning liquid unit and shaking it gently.• You can clean with the cleaning liquidfilter removed.After washing, be sure to attach thecleaning liquid filter.4 Gently wipe off any beardtrimmings attached to the insideof the cleaning tray (a) with acloth or tissue paper dampenedwith water.• Clean the corners and uneven parts ofthe cleaning tray with a cotton swabdampened with water.5 Prepare the new cleaning liquid.(See page 12.)Notes• The cleaning liquid will decrease every time it is used, but do notadd detergent and water except when replacing the cleaning liquid.Doing so may deteriorate the cleaning function.• Do not wash the self‑cleaning recharger unit with water.• Do not wipe with thinners, benzine, alcohol etc.Doing so may cause malfunction, or cracking or discoloration ofthe parts.Wipe with diluted soapy water.• Some cleaning liquid components and skin oil may separate andadhere to the cleaning liquid unit and cleaning liquid filter. Thisdoes not indicate a problem.► When the water does not drain from the cleaning tray• Do not tilt the self‑cleaning recharger to pour out water. Doing somay cause the cleaning liquid in the cleaning liquid unit to spill orcause the self‑cleaning recharger to malfunction.• Beard trimmings may clog the drain at thebottom of the cleaning tray.In this case, you cannot clean or dry the shaver.1. Be sure to remove the AC adaptor from theself‑cleaning recharger.2. Place the self‑cleaning recharger on a flatsurface, and push the beard trimmings downthrough the drain (b) with a toothpick etc.►Replacement partsReplacement parts are available at your dealer or Service Center.Replacement parts forES‑LV9NSystem outer foil and innerblades WES9034System outer foil WES9175Inner blades WES9170Special Detergent for Shaver Cleaning & ChargingSystem WES4L03