Panasonic ES-LV9N Operating Instructions Manual

Also see for ES-LV9N: Operating instructions Operating instructions

Contents

15EnglishCleaning, drying, chargingWe recommend cleaning the shaver after each use.1 Insert the shaver into theself-cleaning recharger andplug the adaptor into ahousehold outlet.(See page 11.)• Check that the charge status lamp( ) is glowing.• When the LOW lamp or the STATUSlamp lights up, see page 19.1212 Press .The CLEAN lamp and the DRY lamp glow, and the “AUTO”mode will start after approximately 6 seconds.• It is not possible to change the mode after the “AUTO” modehas started.Clean10 minDry80 min*Charge0 to 60 min*When the ambient temperature of the self‑cleaning rechargeris low (approx. 15 °C (59 °F) or lower), the drying process willtake up to 170 min.3 Remove the adaptor after the selected mode iscompleted.Clean the shaver with water once per month.(See page 16.)The main unit neck section (a), inner bladeattachment part (b), trimmer, system outer foilgaps, etc. cannot be cleaned with the self‑cleaningrecharger.Changing the mode of self-cleaning rechargerThe “Charge” mode starts when attaching the shaver, and themode can be changed by pressing the SELECT button.Charge mode(Charge)AUTO mode(Clean/Dry/Charge)Dry/Charge mode(Dry/Charge)Notes• Do not press the cleaning liquid unit removal button duringcleaning as the cleaning liquid may spill causing a malfunction.• The drying time may increase in an ambient temperatureapproximately 15 °C (59 °F) or lower.The Clean or Dry function may not operate under extreme lowtemperatures (approximately 0 °C (32 °F) or lower).• A lubricant constituent is included in the detergent, so smoothshave is maintained without applying oil.