Parts and Their Functions GTWIN Reference Manual172The conversion will be performed according to the method that you select, andthen the details after the conversion will be displayed in the dialog box. Thefollowing figure shows an example of the style being kept.5. Use the icons to the right of the editing screen to change the style of the switch inthe OFF steThe icons are identical with the icons from the toolbar "Draw (see p. 27)".6. In the scroll-down list on the lift, select the image of the ON switch to continuecustomization for the switch in the ON state7. [OK]The style and attributes after the conversion are applied to the new custom part. The part attributes before the conversion are transferred as-is to the partafter the conversion. If you click [No] in step 4, only the displayed image information is cleared,and the transparent parts are displayed in the dialog box and the screen. You can use the same procedure to convert a custom part to a non-custompart. The "Simple" style will be selected for the displayed image afterconversion.
