GTWIN Reference Manual 5.4 Data Parts183Using Japanese, Chinese, or Korean charactersThe GT models except for GT02 support the display of Japanese (Hiragana, Katakana andKanji (Chinese) characters), Chinese, and Korean for data parts. The input of one-byte Kanais available with the Kana keyboard, which is available from the parts library "Template" (firstdropdown list in the "Parts Library" window pane, see below) for GT02 to GT32. ForGT703/GT704/GT707, the Kana keyboard is included in the standard parts library.Library with Japanese KANA keyboardsUsable GTGT707 Ver1.30 or laterOther models Ver1.00 or later5.4.1 Basic Setup for Data PartsThis section explains the basic setup parameters in detail. What appears on the tab may differdepending on the data format you have selected.Number of DigitsSpecify the number of digits displayed by the data part. Note that the number of digits allowedvaries depending on the data format. The valid range of digits is displayed.Data FormatSelect the data format.Data Format Contents Maximumno. of digitsDisplay range No. of wordsBCD (4 digits, 1word)Binary coded decimaldisplay4 0 to 9999 1BCD (8 digits, 1word)Binary coded decimaldisplay8 0 to 99999999 2
