Menus GTWIN Reference Manual94GT Configuration dialogIf you click [Initialize] and then [OK], all settings except the language settings will be reset tothe default values.The following table describes what each tab is for. The settings for each tab are described inthe corresponding sections.Tab DescriptionBasic Setup (see p. 95) Specify basic items for the GT touch panel, e.g. the basic communicationarea to the PLC.GT Communication Parameters(see p. 99)Specify communication parameters between the GT touch panel and a PLCor between the PC (GTWIN) and the GT touch panel.PLC Multiple Connection (see p.100)(except for GT707)Specify the settings for connecting multiple Panasonic PLCs by RS485communication.Clock Setting (see p. 102) Specify the settings for the internal clock.Multi-Language Exchange Select "Refer to PLC" and specify a reference device if the multi-languagefunction should be controlled by the PLC (see p. 111).GT Link (see p. 112)(except for GT707)Enter settings for GT Link.Recipe (see p. 115) Specify recipe control device.SD Recipe (see p. 116) Specify SD recipe control device. Also set the timeout period and the screen
