Menus GTWIN Reference Manual98Item ExplanationBuzzer Turns on the buzzer.Forced display flag 0: Screens can be changed at will.1: The screen specified as a number in the Word position n+0 of the PLC is forciblydisplayed.Backlight valid flag When the bit is turned on, backlight flashing/backlight color control becomes effective.Backlight flashing 0: lighted (normal), 1: flashingBacklight color GT02G, GT05G, GT12G, GT703,GT7043-color LED backlight00: Off, 01: Green, 10: Red, 11: OrangeGT02M, GT05M, GT12M, GT703,GT7043-color LED backlight00: Off, 01: White, 10: Red, 11: PinkGT02L, GT03-E, GT05S, GT32,GT32-E, GT32-R, GT70700: Off, 01: Lighted, 10: Lighted, 11: LightedTouch sound 1: touch sound not activated.0: touch sound activated, i.e. switches will produce a beep when pressed if so defined.Reverse display For monochrome types only.1: reverse display activated. All parts displayed in reverse, i.e. the light areas becomedark and the dark areas become light.0: reverse display not activated.Backlight brightness 0000: no backlight brightness adjustment in Basic Communication Area.0001-1111: the larger the value, the brighter the backlight.Password change screendisplay flag1: screen for changing the password displayed, or the screen for passwordmanagement (administrator only) displayed.0: the screen for changing the password not displayed, or the screen for passwordmanagement (administrator only) not displayed.Login screen display flag 1: login screen displayed. 0: login screen not displayed.Battery low flag This bit is ON when the power supply voltage drops too low. The dead battery mark isdisplayed in the lower right of the screen only when the option "Battery Error Display"(see p. 95) is activated on the "Basic Setup" tab.The flag activates regardless of the "Battery Error Display" setting. Please replace abattery within a week since the dead battery mark is displayed.Battery This flag turns on when the battery reaches the end of its service life and the clockdata can no longer be maintained. The battery service life is checked when the GTturns on. If the GT is left on continually, the battery service life is not detected.The battery error mark is displayed in the lower right of the screen only when the"Battery Error Display" check box is selected under System Setting GTConfiguration Basic Setup (see p. 95). The BAT flag activates regardless of the"Battery Error Display" setting.Data input in progress This bit is ON while data is being input.This flag is ON while an SD memory card is inserted.
