Panasonic HC-WXF1 Operating Instructions Manual

Also see for HC-V800: Basic operating instructions Basic owner's manual Basic operating instructions

- 198 -Playing back on a TVYou can play back the scenes and still pictures recorded with or stored in this unit on a TV.≥ The following scenes can be played back:j Scenes recorded in AVCHDj Scenes recorded as Backup for Twin Cameraj Scenes recorded in MP4 [720]j Scenes saved in MP4 (1280k720/25p) or MP4 (640k360/25p)≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in[Wi-Fi Setup] (l 212 to 215).1 Press Wi-Fi button on this unit.2 Touch [DLNA Play] on the Wi-Fi menu screen.≥ If you touch [Change AP], you can switch the wireless access point to another one that has beenregistered to this unit.≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.≥ When the connection to this unit is complete, the screen of this unit turns off. To display it again,touch the screen.3 Select this unit (SSID) by the TV side.≥ Select the media ([SD/MEM]) and select the motion picture ([AVCHD/MP4]) or still picture([JPEG]) to play back.4 Perform playback operations with the TV remote control.≥ You cannot play back the following scenes:j (For the series/ series/ series)Scenes recorded in 4K MP4j Scenes recorded in 24pj Scenes recorded with [1080/50M] or [1080/28M] of [MP4]j Scenes saved in MP4 (1920k1080/25p)≥ Depending on your environment, such as the network condition, scenes may not be played backsmoothly.≥ Playback operations may differ depending on the TV inuse.≥ The following operations can be performed if a colourbutton is pushed.Blue/Red: Skip playback≥ Fast forward/Fast rewind playback cannot be performed.≥ You cannot perform playback operations with this unit.To exit [DLNA Play]:Touch [EXIT] or press Wi-Fi button.≥ A message is displayed. Touch [YES] to exit.(Examples of operations duringmotion picture playback)A Skip playbackB StopC Playback/PauseWXF1 VXF1 VX1