Panasonic HC-WXF1 Operating Instructions Manual

Also see for HC-V800: Basic operating instructions Basic owner's manual Basic operating instructions

- 223 -You can change or check your wireless LAN’s network settings, such as the [IP Address], [SubnetMask] and [MAC Address].≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],you can set each item. Select the item you want to set, and set it.≥ [MAC Address] cannot be changed.You can test the connection between this unit and the wireless access point. The followingconnections can be verified:j Connection to the wireless access pointj Connection to “LUMIX CLUB”j Connection to USTREAMj Connection to the home monitor server1 Touch [NEXT].≥ The connection test starts.2 Check the connection test result, and touch [EXIT].≥ If the connection is successful, “±” is displayed. If the connection is not successful, “t” isdisplayed.≥ To test the connection to “LUMIX CLUB” or USTREAM, you need to make other settings inadvance. (l 204)You can change the workgroup setting.≥ When copying scenes or still pictures to a PC using a Wi-Fi function [Copy], you need to create ashared folder on the PC and connect this unit to the workgroup to which the PC belongs.(The default setting is [WORKGROUP].)≥ For information on how to create a shared folder, refer to page 200.≥ For details on how to enter characters, refer to page 137.≥ A maximum of 15 characters can be entered.[Wireless LAN setup][IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address][Connection Test][PC Connect Setup] [Change]/[Return to default][Change]: Enter the name of the workgroup to which the destination PC belongs.[Return to default]: This will set to the condition at the time of purchase.