Panasonic HC-WXF1 Operating Instructions Manual

Also see for HC-V800: Basic operating instructions Basic owner's manual Basic operating instructions

- 216 -1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].2 Touch [Direct Connection].3 Touch [Change connection type].4 Touch [Easy Connection (WPS)].5 Turn on the Wi-Fi function in the smartphone’s setup menu.6 Set the smartphone to WPS Mode.1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].2 Touch [Direct Connection].3 Touch [Change connection type].4 Touch [QR code].≥ QR code is displayed on the screen of this unit.5 Start up the smartphone application “Image App”.6 On the smartphone, select [QR code], and scan the QR code displayed on thescreen of this unit.≥ When using an Android device, the smartphone and this unit are connected directly, allowing youto use remote operations.Control this unit remotely with the smartphone. (l 186)For information on how to exit [Remote Ctrl], refer to page 185.≥ When using an iOS device, perform the following operations:1 Select the option that allows you to install the app on the profile screen of the “Image App”, andfollow the on-screen instructions to complete the installation.2 Press the home button to close the displayed screen.3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.≥ When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.[Easy Connection (WPS)]Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screenConnecting with QR codeConfirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screen