Panasonic HC-WXF1 Operating Instructions Manual

Also see for HC-V800: Basic operating instructions Basic owner's manual Basic operating instructions

- 237 -≥ (For the series/ series/ series)The image being captured by the smartphone connected to this unit will be displayed in a SubWindow of this unit.≥ If you touch , the registration will be cancelled.≥ You cannot connect devices other than smartphones for the Wireless Multi-Camera function.≥ Changing the [Direct Connection Password] setting clears registered smartphones.≥ When you have made a connection with [Direct Connection Password] set to [ON], connect thesecond and subsequent smartphones with the same setting. The smartphones can be connectedeven if different connection methods, [Wi-Fi] and [QR code], are used for them.≥ The following operation allows you to register up to ten smartphones. If the number exceeds ten,smartphone information with the oldest registration date and time will be deleted. (Smartphonesmay become unregistered when you use the Wireless Multi-Camera function.)j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphonedirectly.≥ You can also switch the image in the Sub Window. Refer to “Switching the image in the SubWindow” on page 244.When connecting for the second time or later1 Touch the recording screen on this unit andtouch .2 Start up the smartphone application “ImageApp”.≥ This unit and the smartphone will be connected via Wi-Fi.When the connection to this unit is complete, the image beingcaptured by the smartphone will be displayed on the Sub Window of this unit.≥ If the connection cannot be established or no image appears on the Sub Window, follow the stepsbelow to set up the connection again:1 Close the smartphone application “Image App”.2 Touch the recording screen of this unit again and touch .3 Touch [Change Device] on the screen of this unit.After completing the steps above, follow the procedure from Step 2 onwards in “Selecting this unit’sSSID on the smartphone to set up a connection” in “When connecting a smartphone to this unit as aWireless Sub Camera for the first time (To use the Wireless Twin Camera function)”. (l 229)≥ [History] allows you to set up a Wi-Fi connection with the Wi-Fi function settings you have usedbefore. (l 217)To use the Wireless Twin Camera functionVXF1 VX1 V800