- 207 -∫ To configure the e-mail delivery settingsYou can make the delivery setting of a broadcast notification e-mail and the setting for thescheduled time and date of the broadcast indicated in the e-mail.1 Touch [Send E-mail].2 Touch [ON] or [OFF].3 (When [ON] is selected)To set the scheduled broadcast date.∫ To set the line quality1 Touch [LINE QUALITY].2 Touch the desired line quality.≥ Frame rate in parentheses are when recorded in simultaneously.≥ Depending on the line status of the broadband line, mobile router (tethering), etc. to which thisunit is connected, the image and sound may be interrupted or the connection may be lost. Set theline quality on this unit by referring to the recommended optimal speeds (upstream) above.≥ For information on the optimal speed, contact your service provider, etc.≥ If the image being broadcast appears as if frames were dropped or stops when [AUTO] is set,change [LINE QUALITY] according to your environment.≥ If the selected line quality has an image quality higher than the one you are using, images willappear as if the frame rate is low.≥ Operation cannot be guaranteed for all devices.≥ Even with a broadband line, the recommended optimal speed may not be reached depending onyour environment.≥ Narrowband lines such as analogue modems cannot be used.≥ If the line for the smartphone is switched, communication may be interrupted. In that case,connect again.[ON]: Enables e-mailing.[OFF]: Disables e-mailing.[Set to Sending E-mailTime]: Allows you to set the date on which is touched.[Manual Setting]: Allows you to set the desired time and date.≥ The setting method is the same as [CLOCK SET]. (l 28)LineQuality Picture size Frame rate ScreenindicationsRecommended optimalspeed (upstream)[High] 1280k720 5 to 25 fps(5 to 10 fps) 3 Mbps or higher[Medium] 640k360 5 to 25 fps(5 to 10 fps) 1 Mbps or higher[Low] 320k176 5 to 25 fps(5 to 15 fps) 500 kbps or higher[AUTO] Use this option to check the line quality and automatically set the item.