- 110 -∫ Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting an AV cable (commercially-available).≥ Images are dubbed in standard quality.≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Press the THUMBNAIL button to switch this unit to the Playback Mode. (l 22)1 Connect this unit to a video device and start playback on this unit.2 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.≥ When this unit and the TV are connected with an AV cable (commercially-available), even if youset [HDMI RESOLUTION] (l 92) to [DOWN CONV.], scenes in the recording format option [C4K/24p 100M] cannot be output.≥ Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.≥ If the date and time display and function indication are not wanted, cancel them before dubbing.(l 92, 154)Dubbing in standard picture qualityChange the video input on thevideo device and TV that thisunit is connected to.≥ The channel set will differ depending onthe terminal to which the unit isconnected.≥ See the operating instructions of thevideo device for details.≥ Insert the plugs as far as they will go.A AV cable (commercially-available)If the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction for the device you are connecting to or read theoperating instructions of the wide-screen TV and set the aspect ratio to 16:9.VIDEO OUTAUDIO OUTLR
