- 43 -≥ Focus Assist is cancelled in following cases:j If you turn the unit offj If you press the THUMBNAIL buttonj When the setting of [FOCUS ASSIST] (l 40) is changedj When EVF/LCD detail is enabled. (l 40)j When you set this unit to Intelligent Auto Mode using the iA/MANU switch.j When you set the FOCUS A/M/¶ switch to [A]j When you press the USER button to which [FOCUS TRANSITION] is registered or touch theapplicable USER button icon (l 61)≥ The magnified display and peaking are not displayed on recorded images.≥ The magnified display and peaking are not displayed on a TV.≥ Freeze Frame is not available when you use Focus Assist. (l 67)≥ Peaking may not be displayed when you use Digital Zoom (l 65). To zoom in and use peaking atthe same time, we recommend setting [FOCUS ASSIST] to [BOTH] and increasing themagnification level of the magnified display.(Notes on the magnified display of Focus Assist)≥ Some information on the screen disappears when the screen is magnified.≥ Still pictures cannot be recorded when the screen is magnified.≥ In the following cases, the screen is not magnified during Focus Assist:j During motion picture recording or PRE-REC (l 146)j When using Digital Zoomj When using Area Mode (l 68)≥ If you set the magnification level of the magnified display to 5.5k or higher, peaking may not bedisplayed when using i.Zoom (l 37).Focus TransitionYou can use Focus Transition by registering “Focus Transition” to a USER button. With FocusTransition, you can shift the current focus position to a pre-registered focus position.≥ Please refer to page 61 for details about setting the USER button.To use Focus Transition, you need to register a focus position.≥ You can register up to three focus positions.≥ Switch to Manual Mode. (l 34)1 Select the menu.≥ The current focus position will be registered as an initial position.2 Adjust the focus by rotating the focus ring.3 Touch the item to which you want to register the focus position.≥ The icon of the item to which the focus position has been registered will be highlighted in yellow.≥ To select a different item, perform the operations in Steps 2s3.Registering a focus position: [CAMERA SETUP] # [FOCUS TRANSITION] # [Setup][1]/[2]/[3]MENU
