- 126 -1 Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fifunction.2 Select the menu.3 Touch [Change connection type].4 Touch [QR code].≥ QR code is displayed on the screen of this unit.5 Start up the smartphone application “Image App”.6 On the smartphone, select [QR code], and scan the QR code displayed on thescreen of this unit.≥ When using an Android device, the smartphone and this unit are connected directly, allowing youto use remote operations. (l 115)≥ When using an iOS device, perform the following operations:1 Select the option that allows you to install the app on the profile screen of the “Image App”, andfollow the on-screen instructions to complete the installation.2 Press the home button to close the displayed screen.3 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone,start up the “Image App”.≥ When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.1 Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fifunction.2 Select the menu.3 On the smartphone, select the SSID displayed on this unit from the Wi-Fisetup menu.4 Enter the Password displayed on this unit’s screen on the smartphone.Confirming that the Wi-Fi connection is completej is displayed on the screenConnecting with QR code: [Wi-Fi Setup] # [Direct Connection ]Confirming that the Wi-Fi connection is completej is displayed on the screenConnecting by entering an SSID and Password: [Wi-Fi Setup] # [Direct Connection ]MENUMENU
