- 127 -≥ Transmission speed may decrease, or may not be usable depending on the environment it isused in.If the Wi-Fi connection cannot be established≥ Please refer to the operating instruction of the device in use for details about the setting of thewireless access point or smartphone.Confirming that the Wi-Fi connection is completej is displayed on the screenProblem Check pointsIt cannot connect to thewireless access point.The wireless access pointis not detected.(General)≥ Turn ON the wireless access point.≥ Approach the wireless access point and reconnect.≥ If it takes time to complete the connection, the Wi-Ficonnection will be aborted.Reset the connection settings.≥ Check how to connect to the wireless access point and howto set the security settings.≥ If the wireless access point supports both the 2.4 GHz bandand the 5 GHz band, check if the setting for the 2.4 GHz bandis enabled.≥ Make sure the wireless access point is registered in this unit.(l 129)≥ The device may be unable to locate the wireless access pointdue to problems with the signal. Refer to “Setting up aconnection manually”. (l 124)([Easy Connection (WPS)])≥ Make sure the wireless access point is in the correct WPSstandby mode.≥ Make sure the PIN code has been correctly input.([Search] or [Set Manually])≥ Make sure the SSID and password have been correctly input.≥ Check the Authentication method, Encryption type, andEncryption key (Password).Radio waves of thewireless access point getdisconnected.≥ The condition may improved by moving the location orchanging the angle of the wireless access point.≥ If you use another 2.4 GHz band device such as a microwaveoven or cordless telephone nearby, you may interrupt thesignal. Keep a sufficient distance from these types of devices.
