106The underlining in the variable range column indicates the setting inthe preset mode.Setting menu screens FILM (CAM) MAIN MENU 2 (continued)SUPER GAIN screenThe gain allocated to the SUPER GAIN switch is seton this screen.Item Variablerange RemarksS. GAIN VALUE 18dB24dB30dB36dBVFdisplayUSERENGFor selecting the gainwhen the SUPER GAINswitch is pressed.FRAME MODE screenThe frame rate is set on this screen.Item Variablerange RemarksFRAME RATERANGE60-1260-4VFdisplayUSERENGFor selecting the variablerange of the frame rate.60-12:60 fps to 12 fps60-4:60 fps to 4 fpsFRAME RATE(CAM MENU)(FILM MENU)60:24:4USERENGFor setting the frame rate.When “60-12” has beenselected as the FRAMERATE RANGE setting, theframe rate cannot be set to11 fps or below.SCAN REVERSE ONOFFUSERENGThis function is forcorrecting the imageswhen the prime lens isused.ON : The images arecorrected (byreversing their topand bottom and theirleft and right).OFF : The images are notcorrected.S C U F E S C U F ES C U F ES C U F ES C U F EUSER SWFRAME RATE60:24:12USERENGFor setting the frame rateto be allocated to theUSER1 or USER2 button.Using the USER1 or USER2 button to switch theframe rateO Once the desired frame rate has been set in aUSER (USER1 or USER2) button by performingmenu operations, subjects can be shot at the setframe rate simply by pressing the USER button.The original frame rate is restored when the USERbutton is pressed again.O While recording is in progress, the frame rate willnot be switched even when the USER button ispressed.O When the frame rate has been switched using theUSER button, the switched rate will not take effecteven if one of the synchro scan switches (“+” or “– ”)is pressed after the JOG dial button is pressed.
