31Adjusting the white shading (continued)Select the file No.Give a title to the selected file.5 Turn the JOG dial button to move the arrow(cursor) to the “TITLE : ” item.< LENS FILE >FILE SELECT :1READWRITERESET ALLn TITLE:1: 5:2: 6:3: 7:4: 8:6 When the JOG dial button is pressed, the arrow(cursor) moves to the title input area, and the inputmode is established.< LENS FILE >FILE SELECT :1READWRITERESET ALLmTITLE:1: 5:2: 6:3: 7:4: 8:10 When the title has been input, turn the JOG dialbutton to move the arrow (cursor) to the “:”position.< LENS FILE >FILE SELECT :1READWRITERESET ALLmTITLE:2222222222221: 5:2: 6:3: 7:4: 8:2 Turn the JOG dial button to move the arrow(cursor) to the FILE SELECT item4 Press the JOG dial button to enter the file number.3 Press the JOG dial button and the file number willflash. Turn the JOG dial button to select the file (1to 8) to be recorded.< LENS FILE >FILE SELECT :1READWRITERESET ALLn TITLE:1: 5:2: 6:3: 7:4: 8:7 Press the JOG dial button again and turn it until thecharacter to be set is displayed.When the button is turned, the character displayedis switched in the following sequence:Space: )7letters: A—Z7numbers: 0—97symbols: ’, >, <, /, –, . , x8 Press the JOG dial button to enter the character.9 Turn the JOG dial button to move the arrow(cursor) to the next position (right), and repeatsteps 7 and 8 to set the characters (maximum of12).Writing the white shading adjustmentvalues and flare adjustment values in theinternal memoryUp to eight white shading adjustment values can bestored in the internal memory. Since they are storedat the same time as the flare adjustment values, it isrecommended that the FLARE screen of CAM MAINMENU 4 be opened and the flare adjusted beforestoring these values in the internal memory.1 Perform the menu operations (pages 86 to 88),and display the “LENS FILE” screen of FILM(CAM) MAIN MENU 3.
