201A B 0dB C Z73¢¢¢¢ VTR USER MENU ¢¢¢¢¢¢¢¢ FILM USER MENU ¢¢¢¢Menu operation section1 SD memory card insertion slotAn SD memory card (optional accessory) isinserted here. This slot is used for writing/savingmenu data. (See page 74)2 MENU buttonWhen this is pressed, the camera unit’s user menuscreen, which was set at the time of shipment,appears.When it is pressed again, the VTR unit’s user menuscreen appears.When it is pressed once more, the menu screendisplay is cleared.The selection of the menu for the user menu can bechanged on the USER MENU SELECT screen.3 JOG dial buttonWhen this dial button is turned while the menuscreen is displayed, the cursor is moved to each ofthe setting items.The menu items are set by operating this dialbutton.There are two types of menus, MAIN and SUB, andeach menu is displayed on a page-by-page basis.The menu configuration can be changed to suit thedesired objective.For details on the menu operation method, refer to“Menu operations” on pages 86 to 88.Parts and their functions (continued)When the power is turned onStatus displayCamera unit’s usermenuVTR unit’s usermenuPress the MENUbutton.Press the MENUbutton.Press the MENU button.Time code related section (1)1 GENLOCK IN connector (BNC)Supply the analog HD reference signal to thisconnector for gen-locking the camera unit or whenexternally locking the time code.Input reference signals (1280 a 720, 59.94 Hz or1280 a 720, 60 Hz) which have the same format asthe unit.2 TC IN connector (BNC)Supply the time code which will serve as thereference to this connector when externally lockingthe time code.3 TC OUT connector (BNC)To lock the time code of an external VTR to theunit’s time code, connect this connector to the timecode input (TC IN) connector on the external VTR.To simultaneously output the user bits containingthe active frame information, refer to pages 16 and68.3 2 13 21
