Panasonic HL-G1**-A-C5 User Manual

Also see for HL-G1*A-RA-C5 Series: Instruction manual

Contents

Laser Product HandlingJIS/IEC/GB Laser Diode SensorThe laser is classified in accordance with JIS (JIS C 6802: 2005), IEC (IEC60825-1: 2007) and GB (GB 7247.1: 2012) standards.Model No. HL-G1□□-A-C5HL-G1□□-S-JHL-G1□□A-RA-C5HL-G1□□A-RS-JWavelength 655 nm 655 nmMax. output 1 mW 0.39 mWClass 2 1 Precautions1) Be careful not to stare at the laser beam directly or the reflected light of themirror surface.2) Install the sensor so the laser beam will be located higher or lower than eye levelin order not to watch the beam directly while the system is in operation.3) Contact the nearest office of Panasonic Industrial Devices SUNX Co., Ltd. if thesystem breaks down. The product is not provided with a function to stop laserbeam radiation automatically when the sensor head is disassembled. Do notdisassemble the sensor head, or otherwise you may be exposed to the laser beam.4) Do not use the system in methods other than that specified in this manual.You may be exposed to hazardous laser radiation if the system iscontrolled or adjusted in procedures not specified in this manual.5) Read the descriptions of the warning label carefully before use.The warning label (English) is affixed to the side of the sensor head. Warninglabels in Japanese, Korean, and Chinese are enclosed. Use them as needed.Ramco National800-280-6933 | nsales@ramcoi.comwww.panasonicsensors.com