Panasonic HL-G1**-A-C5 User Manual

Also see for HL-G1*A-RA-C5 Series: Instruction manual

Contents

3-3-2 Memory ChangeThe memory to save setting contents can be changed with M0 through M3.Setting Function Panel displayM0 Memory M0M1 Memory M1M2 Memory M2M3 Memory M3* indicates the default value.• Select the first number to be changed when the system goes into setting mode.• Data unstability may result when the memory change is executed.• If setting changes are made with a serial communications command, save thechanges so that the changes will be reflected when the system is turned ON again.● Setting Procedure1 Display the "Memory Change" screenwhile the system is in setting mode.2 Press the [ENTER] key. The memorywill be displayed.3 Press the [UP]/[DOWN] key to makememory changes. (Example: Changingthe memory to “M3”.)4 Press the [ENTER] key to determine thememory.● Memory Saving SettingsEach function that has been set can be saved in four ways in the memoryarea in the sensor head.Measurement and judgment conditions can be saved individually according to thetype of measurement object. Therefore, memory number changes will be possiblewithout entering the set values for a wide variety of functions.Memory changes are made with external commands and settings in the controlpanel.Ramco National800-280-6933 | nsales@ramcoi.comwww.panasonicsensors.com