Initial Programming31For Fax Advantage assistance, call 1-800-435-7329.Initial ProgrammingDate and time, your logo and fax numberYou should program the date and time, your logo and fax number. This information will be printedon each page transmitted from your unit.Setting the date and time1 Press {{{{MENU}}}}.SYSTEM SET UPPRESS NAVI.[( )]2 Press {{{{<<<<}}}} or {{{{>>>>}}}} until the following isdisplayed.SET DATE & TIMEPRESS SET3 Press {{{{SET}}}}.L Cursor (|) will appear on the display.M:|01/D:01/Y:02TIME: 12:00AM4 Enter the correct month/day/year byselecting 2 digits for each, using the dialkeypad.Example: August 10, 2002Press {{{{0}{}{}{}{8}}}} {{{{1}{}{}{}{0}}}} {{{{0}{}{}{}{2}}}}.M:08/D:10/Y:02TIME: |12:00AM5 Enter the correct hour/minute by selecting 2digits for each, using the dial keypad. Press{{{{****}}}} to select “AM” or “PM”.Example: 10:15PM (12 hour clock entry)1. Press {{{{1}{}{}{}{0}}}} {{{{1}{}{}{}{5}}}}.M:|08/D:10/Y:02TIME: 10:15AM2. Press {{{{****}}}} until “PM” is displayed.M:|08/D:10/Y:02TIME: 10:15PM6 Press {{{{SET}}}}.L The next feature will be displayed.7 Press {{{{MENU}}}}.Note:L You can enter the number by pressing {{{{++++}}}}or {{{{----}}}} in steps 4 and 5. In this case, press{{{{>} to move the cursor.L The accuracy of the clock is approximately±60 seconds a month.To correct a mistakePress {{{{<<<<}}}} or {{{{>>>>}}}} to move the cursor to theincorrect number, and make the correction.If you have registered with openLCRserviceThe date and time will be automatically set. Donot change the date and time setting yourself.{SET}{MENU}{<}{>}{+}{-}
