Features Summary88Basic featuresCode #01: Setting the date and timeSET DATE & TIMEPRESS SETSee page 31 for details.Code #02: Setting your logoYOUR LOGOPRESS SETSee page 32 for details.Code #03: Setting your fax numberYOUR FAX NO.PRESS SETSee page 34 for details.Code #04: Printing the sending reportSENDING REPORTMODE=ERROR [±]To print and check the sending report for faxtransmission results (page 56).ERROR (default): The sending report will beprinted only when fax transmission fails.ON: The sending report will be printed out afterevery transmission.OFF: The sending report will not be printed out.Code #06: Changing the ring setting inTAD/FAX modeTAD RING COUNTRINGS=2 [±]To change the number of rings before the unitanswers a call in TAD/FAX mode. You can selectfrom 1, 2 (default), 3, 4, “ TOLL SAVER” and“ RINGER OFF” . See page 65 for details.Code #06: Changing the ring setting in FAXONLY modeFAX RING COUNTRINGS=3 [±]To change the number of rings before the unitanswers a call in FAX ONLY mode.You can select from 1, 2, 3 (default) and 4.Code #10: Changing the incoming messagerecording timeRECORDING TIMEMODE=VOX [±]VOX (default): Unlimited.1 MIN: Up to 1 minute.Code #11: Setting the remote operation IDREMOTE TAD IDID=1111. Press {MENU}.2. Press {<} or {>} and select this feature.3. Enter any 3-digit number except a numberusing 0 or 7.L The default ID is “111”.4. Press {SET}.5. Press {MENU}.Code #13: Setting the dialing modeDIALING MODEMODE=TONE [±]If you cannot dial, change this setting dependingon your telephone line service.TONE (default): For tone dial service.PULSE: For rotary pulse dial service.Code #16: Setting the recording paper sizePAPER SIZE=LETTER [±]LETTER (default): Letter or legal size paper.A4: A4 size paper.Code #17: Setting the ringer patternRINGER PATTERNMODE=A [±]You can select from A (default), B and C. Theselected ringer pattern will sound during setting.See page 86 for the programming method.
