Value Range • Yes: # is treated as the end of dialing delimiter.• No: # is treated as a regular dialed digit.Default Value YesConfiguration File Reference POUND_KEY_DELIMITER_ENABLE (Page 281)International Call PrefixDescription Specifies the number to be shown in the place of the first "+" symbolwhen the phone number for incoming international calls contains "+".Value Range Max. 8 characters (consisting of 0–9, *, and #)Default Value Not stored.Configuration File Reference INTERNATIONAL_ACCESS_CODE (Page 303)Country Calling CodeDescription Specifies the country/area calling code to be used for comparativepurposes when dialing a number from the incoming call log thatcontains a "+" symbol.Value Range Max. 8 characters (consisting of 0–9, *, and #)Default Value Not stored.Configuration File Reference COUNTRY_CALLING_CODE (Page 304)National Access CodeDescription When dialing a number from the incoming call log that contains a "+"symbol and the country calling code matches, the country calling codeis removed and the national access code is added.Value Range Max. 8 characters (consisting of 0–9, *, and #)Default Value Not stored.Configuration File Reference NATIONAL_ACCESS_CODE (Page 304)Default Line for OutgoingDescription Selects the line used to make an outgoing call when no line is specifiedin the dialing operation.Document Version 2015-07 Administrator Guide 1394.6.1 Call Control
