Description Specifies the cadence, in milliseconds, of pattern ID 2, described in theLSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated bycommas.Value Range 0–5000 (0: Continuous)Note• Avoid setting 1–50 for any of the values.Default Value 800,400,800,4000BELL_CORE_PATTERN3_TIMINGValue Format Comma-separated IntegerDescription Specifies the cadence, in milliseconds, of pattern ID 3, described in theLSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated bycommas.Value Range 0–5000 (0: Continuous)Note• Avoid setting 1–50 for any of the values.Default Value 400,200,400,200,800,4000BELL_CORE_PATTERN4_TIMINGValue Format Comma-separated IntegerDescription Specifies the cadence, in milliseconds, of pattern ID 4, described in theLSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated bycommas.Value Range 0–5000 (0: Continuous)Note• Avoid setting 1–50 for any of the values.Default Value 300,200,1000,200,300,4000BELL_CORE_PATTERN5_TIMINGValue Format Comma-separated IntegerDescription Specifies the cadence, in milliseconds, of pattern ID 5, described in theLSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated bycommas.Document Version 2015-07 Administrator Guide 2995.3.33 Tone Settings
