Value Range • Y: Enable• N: DisableDefault Value NWeb User Interface Reference Enable Call Park Notification (Page 146)SHARED_CALL_ENABLE_nParameter Name Example SHARED_CALL_ENABLE_1, SHARED_CALL_ENABLE_2, ...,SHARED_CALL_ENABLE_6Value Format BOOLEANDescription Specifies whether to enable the Shared Call feature of the SIP server,which is used to share one line among the units.Note• Availability depends on your phone system.Value Range • Y (Enable shared call)• N (Disable shared call)Note• If set to "Y", the SIP server will control the line by using ashared-call signaling method.• If set to "N", the SIP server will control the line by using astandard signaling method.Default Value NWeb User Interface Reference Enable Shared Call (Page 145)FWD_DND_SYNCHRO_ENABLE_nParameter Name Example FWD_DND_SYNCHRO_ENABLE_1, FWD_DND_SYNCHRO_ENABLE_2, ...,FWD_DND_SYNCHRO_ENABLE_6Value Format BOOLEANDescription Specifies whether to synchronize the Do Not Disturb and Call Forwardsettings, configured via the Web user interface or phone user interface,between the unit and the portal server that is provided by your phonesystem dealer/service provider.Note• Even if you specify "Y", this feature may not function properly ifyour phone system does not support it. Before you configurethis setting, consult your phone system dealer/service provider.Value Range • Y (Enable Do Not Disturb/Call Forward synchronization)• N (Disable Do Not Disturb/Call Forward synchronization)Default Value NDocument Version 2015-07 Administrator Guide 3075.3.34 Call Control Settings
