Value Range • HTTP/1.0• HTTP/1.1Note• For this unit, it is strongly recommended that you select [HTTP/1.0]. However, if the HTTP server does not function well withHTTP/1.0, try changing the setting [HTTP/1.1].Default Value HTTP/1.0Configuration File Reference HTTP_VER (Page 200)HTTP User AgentDescription Specifies the text string to send as the user agent in the header of HTTPrequests.Value Range Max. 64 charactersNote• If "{mac}" is included in this parameter, it will be replaced withthe unit’s MAC address in lower-case.• If "{MAC}" is included in this parameter, it will be replaced withthe unit’s MAC address in upper-case.• If "{MODEL}" is included in this parameter, it will be replacedwith the unit’s model name.• If "{fwver}" is included in this parameter, it will be replaced withthe firmware version of the unit.Default Value Panasonic_{MODEL}/{fwver} ({mac})Configuration File Reference HTTP_USER_AGENT (Page 200)Authentication IDDescription Specifies the ID for the User account. If set, this name must be enteredto access the Web user interface at the User access level.Value Range Max. 128 charactersDefault Value Not stored.Configuration File Reference HTTP_AUTH_ID (Page 201)Authentication PasswordDescription Specifies the password for the User account. If set, this password mustbe entered to access the Web user interface at the User access level.Value Range Max. 128 charactersDefault Value Not stored.Configuration File Reference HTTP_AUTH_PASS (Page 201)86 Administrator Guide Document Version 2015-074.3.3 HTTP Client Settings
