Type Description Details inNo Answer (IRNA) If a called party does not answer a call within apreprogrammed time period (Intercept time), thecall is redirected to a preprogrammed destination.® 9.1.11 InterceptRoutingBusy If a called party is already handling another call,the new call is redirected to a preprogrammeddestination.DND If a called party is in Do Not Disturb (DND) mode,the call is redirected to a preprogrammeddestination.No Destination If a destination is not assigned, the call isredirected to an operator.® 9.1.12 InterceptRouting—NoDestinationPC Programming Manual References3.34 [1-1] Slot—Port Property - T1 Port— Trunk Property12.2 [10-2] DIL Table & Port Settings—DIL— Trunk Property9.1.11 Intercept RoutingDescriptionRedirects an incoming CO line call or intercom call to a preprogrammed destination when the originaldestination does not, or can not, answer the call. There are four types of Intercept Routing, described below.Type DescriptionNo Answer (IRNA) If a called party does not answer a call within a preprogrammed time period(IRNA Timer), the call is redirected to a preprogrammed interceptdestination.The assigned intercept destination of the extension port.® 4.5 [2-3] Timers & Counters→ Dial / IRNA / Recall / Tone— Intercept Routing No Answer (IRNA)—Day, Lunch, Break, Night→ DISA / Door / Reminder / U. Conf— DISA—Intercept Timer—Day,Lunch, Break, Night® [203] Intercept TimeBusy If a called party is already handling a call, new calls are handled as follows:– The call is redirected to the preprogrammed Intercept Routing—Busydestination.– If an Intercept Routing—Busy destination is not enabled, the caller willhear a busy tone. However, if the call is made through an LCOT orT1 [LCOT/GCOT] card, the caller hears a ringback tone.DND If a called party is in Do Not Disturb (DND) mode, the call is redirected toa preprogrammed intercept destination.158 Feature Manual Document Version 2009-129.1.11 Intercept Routing
