Quick Dialing No. Destination No.720 91333123If the call cannot be completed using the VoIP network, and the dialed leading number is found in the QuickDialing Table, the call will be automatically rerouted to a CO line and as specified by the correspondingdestination number.When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX withinabout 4 seconds of making the call, or an error is returned, the call is rerouted to a public CO line as specified.Sending Faxes Through the NetworkThrough system programming, it is possible to select whether faxes are sent using analog or T.38 protocolsignals.Conditions• Some QSIG services are available. (® 13.1.20 PRIVATE NETWORK FEATURES—QSIG)• Toll Restriction (TRS) settings apply to calls rerouted to public CO lines.Installation Manual References3.4.1 Virtual CardsPC Programming Manual References3.7 [1-1] Slot—Port Property - Virtual IP Gateway Port4.10 [2-6-2] Numbering Plan—Quick Dial— Use quick dial for rerouting to public CO when TIE line does notwork11.1 [9-1] TIE TableFeature Manual References13.1.15 PRIVATE NETWORK FEATURES13.1.26 PS ConnectionDescriptionA Panasonic portable station (PS) can be used in place of a proprietary telephone (PT), providing wirelessaccess to PBX features and call handling.Cell Stations (CSs) allow PSs to receive reception within a designated area.1. RegistrationBefore a PS can be used, it must be registered with the PBX through system programming and assignedan extension number.® 3.39 [1-2] Portable Station—PS Registration and De-registration— Registration® [690] PS RegistrationBecause a PS transmits radio waves, it is possible that a PS belonging to a neighboring PBX can beregistered to your PBX. To prevent this sort of unauthorized registration, a personal identification number(PIN) can be programmed for this PBX that must be entered on the PS during registration. This PIN, ifprogrammed, is only used during the PS registration process.Document Version 2009-12 Feature Manual 25913.1.26 PS Connection
