General Features288 Features GuideHold RecallDescriptionPrevents a call on hold from being kept waiting longer than a pre-determined time. If the timerexpires, ringing or an alarm tone is sent to the extension user who held the call as a reminder.If the extension is on-hook and its speakerphone (PT only) is off, the phone will ring (HoldRecall Tone).If the extension user is engaged in a call when the Hold Recall Time expires, an alarm tone issent from the built-in speaker of a PT or from the handset of an SLT at 15-second intervals(Hold Alarm Tone).In this case, Call Waiting feature should be enabled at the extension beforehand.Conditions• Hold Recall applies to the following calls:— Calls on Consultation Hold— Calls on Hold— Calls on Exclusive Hold• Automatic DisconnectionIf an inside/outside call placed on hold is not retrieved within 30 minutes, it is automaticallydisconnected.• Hold Recall feature can be disabled by System Programming "Hold Recall Time" in the Programming Guide>.• Hold Recall Tone PatternHold Recall Tone is emitted as follows:• Hold Alarm Tone PatternIf "Call Waiting" is enabled at the extension where the call is held, an alarm tone is emittedas follows:(1) Outside Call Hold Recall Tone1 s(2) Intercom Call Hold Recall Tone1 s15 s
