Panasonic KX-TG1810AL Operating Instructions Manual

Contents

Base Unit Settings35If you select “No Ringing”, the base unitwill not ring during night mode.1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page36).4 Select “Ringer Setup”, then press{>}.5 Select “Night Mode”, then press {>}.6 Select “Ring Delay”, then press {>}.7 Select the desired setting, then press{>}.8 Press {ih}.Call optionsChanging the recall timeChange the recall time, if necessary,depending on the requirements of yourservice provider or PBX.1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page36).4 Select “Call Options”, then press{>}.5 Select “Recall”, then press {>}.6 Select the desired setting, then press{>}.7 Press {ih}.Setting pause lengthChange the pause length, if necessary,depending on the requirements of yourservice provider or PBX.1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page36).4 Select “Call Options”, then press{>}.5 Select “Pause Length”, then press{>}.6 Select the desired setting, then press{>}.7 Press {ih}.Storing/changing emergencynumbersThese settings determine which phonenumbers can be dialled while the call barfeature is on (page 31).1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page36).4 Select “Call Options”, then press{>}.5 Select “Emergency No.”, then press{>}.6 Select a memory location, then press{>}.L If the memory location alreadycontains an emergency number, thenumber is displayed.7 Enter/edit the number, then press{j/OK}.L To erase an emergency number, pressand hold {C/T}.8 Press {ih}.TG1810_1822AL(e-e).book Page 35 Tuesday, March 1, 2005 6:46 PM