Intercom Features28Transferring a call (KX-TG2422AL only)Outside calls can be transferred from onehandset to the other.1 During an outside call, press{INTERCOM}.L The call will be put on hold.2 To page the other handset, press{handset[1]} or {handset[2]}.3 Wait for the paged party to answer.L The paged handset user can answerby pressing {C}, {s}, or{INTERCOM}.L If there is no answer, press {C} or{s} to return to the outside call.4 To complete the transfer, press {OFF}.Transferring a call without speaking tothe paged party1 During an outside call, press{INTERCOM}, then press{handset[1]} or {handset[2]}.2 Press {OFF}.L The outside call rings at the otherhandset.Note:L If the paged party does not answer thecall, press {C} or {s} to return to thecall. If not answered within 1 minute, thecall will ring at your handset again. If youstill do not answer the call within 4minutes, the call will be disconnected.Conference calls (KX-TG2422AL only)A conference call allows 2 handsets tospeak together with an outside party.1 During an outside call, press{INTERCOM}.L The call will be put on hold.2 To page the other handset, press{handset[1]} or {handset[2]}.3 When the paged party answers, press{Conf} on your handset to establish aconference call.L “Conference” will be displayed.L To leave the conference, press{OFF}. The other 2 parties cancontinue the conversation.Note:L The outside call can be put on hold bypressing {HOLD} during a conferencecall. Communications betweenextensions are not suspended. Only theperson who placed the call on hold canresume the conference by pressing{Conf}.TG2421AL_2422AL(e).book Page 28 Tuesday, March 15, 2005 6:29 PM