Panasonic KX-TG2421AL Operating Instructions Manual

Panasonic KX-TG2421AL Operating Instructions Manual Manual pdf 32 page image

Programmable Settings32Display optionsHandset LCD contrastYou can adjust the handset displaycontrast. There are 6 levels. The defaultsetting is level 3.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “LCD contrast” by pressing{V} or {^}, then press {>}.4 Press {V} or {^} repeatedly to selectthe desired setting.5 Press {Save}, then press {OFF}.Telephone settingsRecall timeThe recall time depends on your telephoneexchange or host PBX.You can select: “90ms” (milliseconds),“100ms” (default), “110ms”, “250ms”,“300ms”, “400ms”, “600ms”, or “700ms”.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set tel line” by pressing{V} or {^}, then press {>}.4 Scroll to “Set recall time” bypressing {V} or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.6 Press {Save}, then press {OFF}.Note:L You can access Telstra’s “EASY CALL”service by having the recall time set at100 ms, and then follow Telstra’s “EASYCALL” instructions to operate thisservice.L If the unit is connected via a PBX, certainPBX functions (call transferring, etc.)may not work correctly. Consult yourPBX supplier for the correct setting.Line modeThe line mode is preset to “B” andgenerally should not be adjusted. If “Linein use” on the handset is not displayedproperly, the line mode selection isincorrect. Set line mode to “A”.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.TG2421AL_2422AL(e).book Page 32 Tuesday, March 15, 2005 6:29 PM