Panasonic KX-TG2421AL Operating Instructions Manual

Panasonic KX-TG2421AL Operating Instructions Manual Manual pdf 33 page image

Programmable Settings333 Scroll to “Set tel line” by pressing{V} or {^}, then press {>}.4 Scroll to “Set line mode” by pressing{V} or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.6 Press {Save}, then press {OFF}.Storing your area codeWe recommend storing your area codebefore using Caller ID (page 24). Callsfrom the same area will be recorded in thecaller list without the area code. You do nothave to remove it before calling back thecaller or storing in the phonebook.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set area code” by pressing{V} or {^}, then press {>}.4 Enter your area code (max. 8 digits).L To correct a digit, press {<} or {>} tomove the cursor, then press{CLEAR}. Enter the correct number.5 Press {Save}, then press {OFF}.To erase your area codePress and hold {CLEAR} in step 4, press{Save}, then press {OFF}.Other optionsDial lockThis feature prohibits making outside calls.The default setting is OFF.Important:L When dial lock is turned on, onlyphone numbers stored in thephonebook as emergency numbers(numbers stored with a # at thebeginning of the name) can be dialledusing the phonebook (page 20). Werecommend storing emergencynumbers in the phonebook beforeusing this feature.L When dial lock is turned on, you cannotstore, edit, or erase items in thephonebook.To turn dial lock on1 Press {MENU}.2 Scroll to “Dial lock” by pressing {V}or {^}, then press {>}.3 Enter a 4-digit password.L This password is required whenturning dial lock off. We recommendwriting the password down.4 Press {Save}.5 Press {Yes}.L “Dial lock on” will be displayed.6 Press {OFF}.Note:L If dial lock is turned on, the handsetdisplays “Dial lock”. While there aremissed calls, “Dial lock” is notdisplayed when the handset is off thebase unit or charger.TG2421AL_2422AL(e).book Page 33 Tuesday, March 15, 2005 6:29 PM